Q-Beez
The newly launched Q-Beez is an entrance mat in tile form. These innovative tiles come in two sizes, namely 45 x 45cm and 23.5cm x 75cm. The rectangular tile is also available with Aluminum inserts.
Q-Beez have the following advantages over our roll goods:
- Take very little volume for transportation to the customer
- Easy to install using the clip system for loose-lay or simply glued down
- Depending on the size, there will be less waste in comparison to cutting from a roll
- Various laying patterns can be used, either by altering direction or combining two colours
- If a tile is damaged or badly soiled, the entire mat does not need to be replaced, simply the tile that is damaged
In short, the Q-Beez completes our product range so that we can offer a suitable solution for every need.
Our product range
Entrance mat Q-Beez 45 x 45cm
45 x 45 cm
+/- 8 mm
Polyamide tuft 6.6
+/- 13 mm
6,25 kg/m²
Bitumen
Anthracite, Grey
Q-Beez 45 x 45 cm is an entrance mat in tile form which is easy to install by anyone. The tiles are joined by means of a clip system. A pre-punched hole is visible on each of the corners on the reverse of the tile. It is not necessary to glue the tiles down unless there is going to be light-weight wheeled traffic passing over the mat.
It is recommended to secure them either with double sided tape or a light Aluminium frame to prevent overall movement of the mat. When connecting the clips to the tiles, make sure the joints are firmly pressed together.
Attention should be paid to the arrow on the reverse of the tile which indicates the pile direction. The tiles can either be laid in opposite directions or alternatively 2 different colours can be combined to create an eye-catching pattern.
| Dimensions | 45 x 45 cm |
| Pile height | +/- 8 mm |
| Pile material | Polyamide tuft 6.6 |
| Total height | +/- 13 mm |
| Total weight | 6,25 kg/m² |
| Backing material | Bitumen |
| Available colours | Anthracite, Grey |
| Water absorption | +/- 3 liter/m² |
| Dimensional tolerance | 100 % dimensionally stable |
| Traffic | High foot traffic. The mat should be glued in place in the event of trolley traffic. |
| Application | Indoor |
| Specifications | Refer to pdf data sheet |
| Warranty | Refer to pdf data sheet |
| Maintenance | Refer to pdf data sheet |
Entrance mat Q-Beez 23,5 x 75 cm without aluminum
23,5 x 75 cm
+/- 8 mm
Nylon tuft 6.6
+/- 13 mm
5,7 kg/m²
Bitumen
Anthracite, Grey
Q-Beez 23,5 x 75 cm is an entrance mat in tile form which is easy to install by anyone. The tiles are joined by means of a clip system. A pre-punched hole is visible on each of the corners on the reverse of the tile. It is not necessary to glue the tiles down unless there is going to be light-weight wheeled traffic passing over the mat.
It is recommended to secure them either with double sided tape or a light Aluminium frame to prevent overall movement of the mat. When connecting the clips to the tiles, make sure the joints are firmly pressed together.
Attention should be paid to the arrow on the reverse of the tile which indicates the pile direction. The tiles can either be laid in opposite directions or alternatively 2 different colours can be combined to create an eye-catching pattern.
| Dimensions | 23,5 x 75 cm |
| Pile height | +/- 8 mm |
| Pile material | Nylon tuft 6.6 |
| Total height | +/- 13 mm |
| Total weight | 5,7 kg/m² |
| Backing material | Bitumen |
| Available colours | Anthracite, Grey |
| Water absorption | 3 liter /m² |
| Dimensional tolerance | 100 % dimensionally stable |
| Traffic | High foot traffic. The mat should be glued in place in the event of trolley traffic. |
| Application | Indoor |
| Specifications | Refer to pdf data sheet |
| Warranty | Refer to pdf data sheet |
| Maintenance | Refer to pdf data sheet |
Entrance mat Q-Beez 23,5 x 75 cm with aluminium
23,5 x 75 cm
+/- 8 mm
Polyamide tuft 6.6
+/- 13 mm
8 kg/m²
Bitumen
Anthracite, Grey
Q-Beez 23,5 x 75 cm with aluminium are the latest innovative product introduced by Debomat. Q-Beez is an entrance mat in tile form which is easy to install by anyone. The tiles are joined by means of a clip system. A pre-punched hole is visible on each of the corners on the reverse of the tile.
It is not necessary to glue the tiles down unless there is going to be light-weight wheeled traffic passing over the mat.
It is recommended to secure them either with double sided tape or a light Aluminium frame to prevent overall movement of the mat. When connecting the clips to the tiles, make sure the joints are firmly pressed together.
Attention should be paid to the arrow on the reverse of the tile which indicates the pile direction.
| Dimensions | 23,5 x 75 cm |
| Pile height | +/- 8 mm |
| Pile material | Polyamide tuft 6.6 |
| Total height | +/- 13 mm |
| Total weight | 8 kg/m² |
| Backing material | Bitumen |
| Available colours | Anthracite, Grey |
| Water absorption | +/- 3 liter/m² |
| Dimensional tolerance | 100 % dimensionally stable |
| Traffic | High foot traffic. Mat should be glued into place in the event of light trolley movement. |
| Application | Indoor |
| Specifications | Refer to pdf data sheet |
| Warranty | Refer to pdf data sheet |
| Maintenance | Refer to pdf data sheet |